QIFU Machinery Co., Ltd
QIFU Machinery Co., Ltd
Add to Cart
12mm steel splicing parallel threaded rebar mechanical couplers
Chongqing Qifu Machinery Co., Ltd., a steel bar connection production and service manufacturer, is a Chinese brandenterprise with 8 years of production and marketing service experience. With a registered capital of 30 milion yuan, the factory is located in Chongqing. lt has built a headquarter base integrating operation, research and development, production and sales, and a final assembly base integrating precision processing and assembly. It covers an area of 19,987 square meters and has an annual production capacity of 80 million pieces of connecting sleeves. Qifu has excellent technology research and development and management team in the industry. Qifu is committed toproviding high-quality products for first-class enterprises and world-class projects, so as to make buildings stronger and safer.
Project Solution Capability:Total Solution For Projects Packaging Details
Packaging Details:Cartons,Normal Wooden Cases,Normal Wooden Plate Or According To Your Request
| Material | Steel |
| Application Scenarios | Civil buildings, bridges, water conservancy, etc. |
| Type | Parallel Threaded Rebar Sleeve |
| Size: | 12mm-50mm |
| OEM/ ODM | Can be customized |
| Minimum Size Parameter Table Of Steel Straight Thread Sleeve (unit: mm) | ||||||||||||||
| Applicable Steel Strength Level | Type | Size | Bar Dia. | |||||||||||
| 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 32 | 36 | 40 | 50 | |||
| ≤400 | Standard Positive and Negative wire |
Outer Diamter(D) | 19.0 | 22.0 | 25.0 | 28.0 | 31.0 | 34.0 | 38.5 | 43.0 | 48.5 | 54.0 | 60.0 | — |
| Length(L) | 24.0 | 28.0 | 32.0 | 36.0 | 40.0 | 44.0 | 50.0 | 56.0 | 64.0 | 72.0 | 80.0 | — | ||
| Standard Positive and Negative wire |
Outer Diamter(D) | 18.0 | 21.0 | 24.0 | 27.0 | 30.0 | 32.5 | 37.0 | 41.5 | 47.5 | 53.0 | 59.0 | 74.0 | |
| Length(L) | 28.0 | 32.0 | 36.0 | 41.0 | 45.0 | 49.0 | 56.0 | 62.0 | 70.0 | 78.0 | 86.0 | 106.0 | ||
| Standard Positive and Negative wire |
Outer Diamter(D) | 18.5 | 21.5 | 24.5 | 27.5 | 30.5 | 33.0 | 37.5 | 42.0 | 48.0 | 53.5 | 59.5 | 74.0 | |
| Length(L) | 28.0 | 32.0 | 36.0 | 41.0 | 45.0 | 49.0 | 56.0 | 62.0 | 70.0 | 78.0 | 86.0 | 106.0 | ||
| Applicable Steel Strength Level | Type | Size | Bar Dia. | |||||||||||
| 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 32 | 36 | 40 | 50 | |||
| 500 | Standard Positive and Negative wire |
Outer Diamter(D) | 20.0 | 23.5 | 26.5 | 29.5 | 32.5 | 36.0 | 41.0 | 45.5 | 51.5 | 57.5 | 63.5 | — |
| Length(L) | 24.0 | 28.0 | 32.0 | 36.0 | 40.0 | 44.0 | 50.0 | 56.0 | 64.0 | 72.0 | 80.0 | — | ||
| Standard Positive and Negative wire |
Outer Diamter(D) | 19.0 | 22.5 | 25.5 | 28.5 | 31.5 | 34.5 | 39.5 | 44.0 | 50.5 | 56.5 | 62.5 | 78.0 | |
| Length(L) | 32.0 | 36.0 | 40.0 | 46.0 | 50.0 | 54.0 | 62.0 | 68.0 | 76.0 | 84.0 | 92.0 | 112.0 | ||
| Standard Positive and Negative wire |
Outer Diamter(D) | 19.5 | 23.0 | 26.0 | 29.0 | 32.0 | 35.0 | 40.0 | 44.5 | 51.0 | 57.0 | 63.0 | 78.5 | |
| Length(L) | 32.0 | 36.0 | 40.0 | 46.0 | 50.0 | 54.0 | 62.0 | 68.0 | 76.0 | 84.0 | 92.0 | 112.0 | ||
| Note 1: The minimum size in the table means that the sleeve raw material adopts the mechanical properties index of No. 45 steel in GB/T699 (the measured yield strength and ultimate strength should not be less than 355Mpa and 600Mpa respectively), and the sleeve manufacturer has a good quality control level. The minimum size that can be selected. Note 2: For the sleeve without cutting the outer surface, when the outer diameter of the sleeve is less than or equal to 50mm, the increase should not be less than 0.4mm on the basis of the minimum outer diameter listed in the table; when the outer diameter of the sleeve is greater than 50mm , should be added to the minimum outer diameter size listed in the table should not be less than 0.8mm. Note 3: The minimum size of the measured sleeve shall be measured in at least two directions, and the smallest value shall be used for judgment. |
||||||||||||||