Hydraulic Rebar Connecting Machine , Cold Extruded Rebar Equipment

Hydraulic steel bar joint connecting machine

Product description:

The steel cold extrusion machine realizes the connection of the steel bars by mechanically joining the joint sleeves. Used to connect type II and III steel bars with a diameter of 40mm and below. It is more advantageous to use this machine for construction sites with poor welding performance, insufficient power capacity, and steel bars with tight schedules.

Advantage:

1. The connection quality is stable, reliable and consistent, ensuring a firm connection between the connector and the base material.
2. Compared with ordinary welding process, the efficiency can be improved by more than 3 times.
3. The operation is simple, and the operator can start to work after simple training or reading the manual.
4. The use of steel cold extrusion machine is not affected by environmental restrictions and weather, no fire hazard, arc light stimulation, and power saving.
5. Compared with all kinds of threaded steel bars, it has strong usability, strong versatility and low overall cost. It is the best and most stable joint form among various steel joints.

Features:

1. The joint has high strength, stable and reliable quality; steel bars do not require weldability;
2. The extrusion time required for each joint is only 1-3m, and the work efficiency is several to ten times faster than the general welding method;
3. The power of the oil pump is only 1-4kw, which is not limited by the power supply capacity. The compactor is light and flexible, suitable for simultaneous operation of multiple equipment.
4. No flammable and explosive gas, no fire hazard, and not affected by wind, rain and cold weather:
5. Relieve the crowding of steel joints, which is conducive to the pouring of concrete;
6. It can connect special-shaped steel bars of different diameters and varieties without the need for professional and skilled technicians;
7. The amount of steel used for joints is about 80% less than that for lap joints.